77
Advanced Shooting Functions
4
Switching between Built-in Flash Adjustment Settings
The built-in flash fires with automatic flash adjustments (except in the
mode), but it is possible to set it so that it fires without any adjustments.
1 Select [Flash Adjust] from the
[ (Rec.)] menu.
See Selecting Menus and Settings (Basic
Guide: p. 16).
2 Use the or button to select [Auto] or [Manual] and
press the MENU button.
Settings can be made by turning the multi control dial.
Setting the Flash Adjustment/Flash Output
Mode Dial
Mode Dial
*1 When [Flash Adjust] is set to [Manual], flash output settings can be made.
*2 Only [Flash output] can be set.
Flash Exposure
Compensation
z
When [Flash Adjust] is set to [Auto], settings can be adjusted in 1/3-stop
increments in the range of -2 EV to +2 EV.
z
You can enjoy flash photography with exposure adjustments with the
combined use of the camera's exposure compensation function.
Flash Output
z
In mode or when [Flash Adjust] is set to [Manual], the flash output
can be controlled in three steps, up to FULL, when shooting.
*1 *1 *2
05_EC176CUG_Chap4_E.fm Page 77 Tuesday, June 28, 2005 2:18 PM
To Next Page
Loading...
