EasyManua.ls Logo

Canon PowerShot S80 User Guide Advanced - Using the Self-Timer

Canon PowerShot S80 User Guide Advanced
163 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
36
2 Use the or button to select [On] and press the
MENU button.
Settings can be made by turning the multi control dial.
Using the Self-timer
1 Press button.
The current setting is displayed.
z Pressing the button cycles between
settings.
z You can switch between the (10 sec.), (2 sec.) and (Custom
Timer) options with the [Self timer] option in the [ (Rec.)] menu
(p. 27).
z When the self-timer is set to , the shutter activates 10 seconds after,
and when the self-timer is set to , the shutter activates 2 seconds
after, the shutter button is pressed fully. With the option, the specified
number of shots are taken after the specified delay.
* May not be displayed, depending on mode.
When shooting with a high ISO speed and using the built-in flash,
there is more of a chance of overexposure the closer you are to the
subject.
The fastest shutter speed for flash synchronization is 1/250 second.
The camera automatically resets the shutter speed to 1/250 second if
a faster speed is selected.
When shooting with [Slow Synchro] set to [On], camera shake may
become a factor. Use of a tripod is recommended.
In the case of My Colors, , , , and , the flash mode
setting is not canceled even when the camera is turned off.
Mode Dial
*
EC176CUG_E.book Page 36 Tuesday, June 28, 2005 12:40 PM

Table of Contents

Related product manuals