75
Advanced Shooting Functions
4
Auto Exposure Bracketing (AEB Mode)
The camera automatically takes three shots: one with standard exposure and
one each with positive and negative compensation.
You can adjust AEB settings in 1/3 stops within ±2 EV of the standard
exposure setting. AEB settings can be combined with exposure compensation
settings (p. 69) to extend the adjustment range. The images are recorded in
the following order: Standard exposure, underexposure and overexposure.
1 From the FUNC. menu, select *
(BKT-OFF).
* The current setting is displayed.
2 Use the or button to select
(AEB), press the MENU button and
adjust the compensation range with
the or button.
z Settings can be made by turning the multi
control dial.
z Pressing the button increases the
compensation, and pressing the button decreases it.
z You can shoot the image right after selecting settings by pressing the
shutter button. The menu displays again after the shot, allowing you to
change the settings easily.
z
Select (BKT-Off) to cancel the AEB mode.
Mode Dial
The three shots are taken at the same interval as continuous shooting.
See Continuous Shooting (p. 40).
z The AEB mode cannot be used for flash photography. If the flash fires,
only one standard exposure image gets recorded.
z Three images are shot continuously regardless of the continuous
shooting setting (p. 40).
EC176CUG_E.book Page 75 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
