32
Resetting Settings to Their Default Values
You can reset the menu and button settings to the default settings in one
operation.
1 Select [Reset All] in the [ (Set up)]
menu and press the FUNC./SET
button.
The message "Reset settings to default?"
appears on the LCD monitor.
2 Use the or button to select [OK], then press the
FUNC./SET button.
Resetting starts.
z The normal screen resumes when resetting is complete.
z To cancel resetting, select [Cancel] instead of [OK].
z Settings can be made by turning the multi control dial.
z The following settings cannot be reset to default:
- [Date/Time], [Language] and [Time Zone] options in the [ (Set up)]
menu
- [Video System] settings (p. 31)
- Colors specified in the Color Accent or Color Swap modes
- Mode Settings
- White balance data set with the custom white balance function (p. 71)
- Newly registered My Camera settings
z Settings cannot be reset when the camera is connected to a computer
or printer.
When the camera is in Shooting mode and the mode dial is set to ,
only the mode settings revert to defaults.
EC176CUG_E.book Page 32 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
