107
Print Settings/Transfer Settings
6
Selecting Images for Printing
There are two ways to select images.
z
Singly
z
All images on a memory card
1 In the [ (Play)] menu, select
[Print Order] and press the SET
button.
See Selecting Menus and Settings (Basic
Guide: p. 16).
2 Use the , , or button to
select [Order] and press the FUNC./
SET button.
z You can select it by turning the multi control
dial.
z All print settings for the image are canceled
when you select [Reset].
3 Select images for printing.
Single Images
- When the print type (p. 108) is set to
[Standard] or [Both], select an image with
the or button.
Press the FUNC./SET button, specify the
number of copies to print with or ,
and press FUNC./SET again. (Up to 99
copies can be specified).
You can select the number of copies by
turning the multi control dial.
- When the print type is set to [Index]
(p. 108), choose an image using the
or button and press the FUNC./SET
button to select and deselect.
z When you press the button, the Jump
Bar is displayed to help with searching
Number of print copies
EC176CUG_E.book Page 107 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
