25
Preparing the Camera
1
2 With the or button, select
(Home), and then press the FUNC./
SET button.
3 With the or button, select a
home time zone from the map, and
then press the FUNC./SET button.
z You can select a home time zone by turning
the multi control dial.
z The select area time is taken as the shooting
time.
z To make the correction for daylight saving
time, use the or button to display the daylight saving time icon
( ). The current time is advanced one hour.
4 Use the or button to select (World), press the
FUNC./SET button, and then select a destination time
zone as same as step 3.
Switching to the Destination Time Zone
1 On the [ (Setup)] menu, select [Time Zone] and then
press the FUNC./SET button.
See Selecting menus and settings (Basic Guide: p. 16)
2 Use the or button to select (World), and then
press the MENU button.
z You can modify the destination time zone with the FUNC./SET button.
If you do not select a home time zone beforehand, you cannot
configure the destination time.
Changing the time of the destination time zone's date/time will
automatically change the home time zone's data/time.
EC176CUG_E.book Page 25 Tuesday, June 28, 2005 12:40 PM
To Next Page
Loading...
