Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print User Manual

193
Appendix
Problem Cause Solution
Wait until the orange
indicator stops blinking
and lights steadily,
signaling that the flash
is charged, then press
the shutter button.
• Insert a new CF card.
• If required, download
the images to a
computer and erase
them from the CF
card to make space.
• Format CF card.
See Formatting a CF
card
(p. 138).
• If reformatting doesn't
work, the CF card
logic circuits may be
damaged. Contact
the nearest Canon
Customer Support
Help Desk.
Close the CF card slot
cover or battery cover,
then turn off the
camera.
Close the covers, and
then use the ON/OFF
button to turn the
power off correctly.
Flash is charging
CF card full
CF card not formatted
correctly
Battery cover or CF
card slot cover opened
with camera on
CF card slot cover or
battery cover opened
while camera was
recording to CF card
(warning signal)
Lens will not
retract
Camera will
not record

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English