Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print User Manual

186
Using the Lenses and Lens Adapter (Sold Separately)
The camera supports use of the separately sold Wide
Converter WC-DC52A, Tele-converter TC-DC52 and
Close-up Lens 250D (52 mm). In order to attach any of
these lenses, you also need to use the separately sold
Conversion Lens Adapter LA-DC52D.
• When attaching the wide converter, tele-converter
or close-up lens, be sure to screw it on securely. If
they come loose they may fall from the lens
adapter, posing risk of injury from shattered glass.
• Never look into the sun or into strong light through
the wide converter, tele-converter or the close-up
lens, as this can result in blindness or impairment
of vision.
• If you use the flash when shooting with the wide
converter, the outer area of the recorded image
(especially lower right corner) will come out relatively
dark.
• When using the tele-converter, please set the focal
length to the telephoto end. At other zoom settings, the
image will appear as if its corners have been cut off.
• When using the wide converter, please set the camera
to the wide angle end.
• The wide converter blocks part of the view through the
viewfinder.

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English