Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print User Manual

195
Appendix
Problem Cause Solution
• Be sure to set
batteries firmly into
the charger.
• Be sure that the
power cord is firmly
connected to the
charger, and is firmly
plugged in to the
power outlet.
Wipe them well with a
dry cloth before
charging.
Replace all 4 batteries
with new ones.
Hold the camera
steady when shooting.
Be careful not to block
the AF-assist beam
with your finger or
other items.
Set the AF-assist beam
to [On] (p. 168).
Poor electrical contact.
Battery terminals are
dirty.
Battery life exceeded.
The camera was
moving when you took
the shot.
Autofocus function
hampered by
obstruction to AF-
assist beam.
The AF-assist beam
has been set to [Off]
through the menu.
If using
rechargeable
batteries:
Batteries do
not charge.
Shots are
blurry or
unfocused.

Canon Printing Using a Direct Camera/Printer Connection Guide Direct Print Specifications

General

Brand	Canon
Model	Printing Using a Direct Camera/Printer Connection Guide Direct Print
Category	Digital Camera
Language	English