89
Selecting an Image Quality
User’s Manual Settin
Functions from Menus
Saving the Desired Image
Quality
[Create Profile]
Up to 5 combinations of image quality set-
tings can be stored. The stored image
quality can be selected as an image mode.
Use the [ ] / [ ] buttons and select the
save destination. (Saved memories are
indicated by checkmarks.)
When the desired save destination is
selected, press the OK button.
• The saved settings consist of the brightness,
contract, sharpness, gamma, color adjust-
ment, advanced adjustment, and lamp
mode.
• The number of displayed user memories is 5,
however it is possible to save different set-
tings for when the connected equipment is a
computer (ANALOG PC, DIGITAL PC or
HDMI (when [HDMI In] (P102) is [Computer])
and when AV equipment is connected (COM-
PONENT, HDMI (when [HDMI In] (P102) is
[Auto])). As a result, it is possible to save up
to 10 settings.
• The image mode name which was the basis
for the settings change is also saved in the
user memory. When a user memory is
selected as the image mode, the image
mode that was the base for that user memory
is displayed in the menu as [Baseline Image
Mode].
HDMI Component
Digital PC Analog PC
Image adjustment
Create Profile
To Next Page
Loading...
Need help?
General
