1688
Cause
The ink has run out.
What to Do
Replace the ink tank and close the scanning unit (cover).
Printing under the current condition may damage the printer.
If you want to continue printing in this condition, you need to disable the function for detecting the
remaining ink level. Touch Stop on the printer for at least 5 seconds, and then release it.
With this operation, disabling the function for detecting the remaining ink level is memorized. Please be
advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation
of printing under the ink out condition.
Note
• If the function for detecting the remaining ink level is disabled, the ink tank is displayed in white on
the touch screen when the current estimated ink level is checked.
482
To Next Page
Loading...
