Setting Values Description
[Print quality] 2 [RIP resolution] (de-
fault [600x2400] dpi)
The RIP resolution can improve the readability
of fine details. When you print very thin, slan-
ted lines, for example in Chinese characters,
1200x1200 gives the best result. 600x2400 is
best suited for mainly horizontal and vertical
objects.
[RIP raster] (default
[LINE_200LPI])
The default raster is [LINE_200LPI]. This is best
suited for over 95% of all prints. In special ca-
ses, for example moiré patterns from scanned
images, you can try to improve the print result
with the [DOT_200LPI] raster or even the
[DOT_125LPI] raster. However, then you may
loose some fine details.
The raster screen for PS/PDF jobs is
[LINE_200LPI]. All raster screens are compati-
ble with resolutions of 600x2400 dpi and
1200x1200 dpi.
[Color profile] (default
[Normal])
You can use color profiles when you print col-
or images on a B&W printer. The selected col-
or profile determines how a color image is re-
produced in black and white.
• [Enhanced] is a color profile developed by
Océ that converts CMYK or RGB data into
different gray values in a contrast-balanced
way. When you select [Enhanced], the im-
ages will become lighter, softer and less
contrast-rich.
• [Normal] is a color profile developed by
Adobe
®
that converts color data into gray
values. When you select [Normal], the im-
ages will become darker and more contrast-
rich.
NOTE
You can also use your own color
profiles. Make the required settings
in the Settings Editor.
Overview of the Available Settings for DocBox Jobs
136
Chapter 8 - Plan the jobs
Canon varioPRINT DP line
To Next Page
Loading...
