Print a Job Using PRISMAprepare (Option)
Introduction
PRISMAprepare (optional) is a software application that enables you to prepare your print jobs on
page level. You can preview the result per page.
This procedure describes the most important steps for the preparation of print jobs.
NOTE
See the online help of PRISMAprepare for all the details.
Procedure
1.
Prepare the document.
[29] Lay out preparation with PRISMAprepare
2.
Use the media catalog to define the media.
With PRISMAprepare you can export the media catalog to PRISMAsync controllers.
Print a Job Using PRISMAprepare (Option)
92
Chapter 6 - Prepare the jobs
Canon varioPRINT DP line
To Next Page
Loading...
