[Output] Settings - [1- or 2-sided]
Setting Values Description
[1- or 2-sided]
[Auto]
The automatically set value for this setting.
[1-sided]
The output contains an image on one side.
[2-sided]
The output contains an image on both sides.
[Output] Settings - [Binding edge]
Setting Values Description
[Binding edge]
[Auto]
The automatically set value for this setting.
[Portrait left]
• The output has a vertical format (height >
width).
• The binding edge is at the left-hand side.
• When you turn a sheet over the binding edge,
the image or text on the back of the sheet is in
readable form.
[Portrait top]
• The output has a vertical format (height >
width).
• The binding edge of the print is at the top.
• When you turn a sheet over the binding edge
the image on the back side of the sheet is in
readable form. This means that every back side
of a two-sided print is upside down compared to
the front side.
[Landscape left]
• The output has a horizontal format (width >
height).
• The binding edge of the print is on the left side.
• When you turn a sheet over the binding edge,
the text or image is in readable form.
[Landscape top]
• The output has a horizontal format (width >
height).
• The binding edge of the print is at the top.
• When you turn a sheet over the binding edge,
the image on the back side of the sheet is in
readable form. This means that every back side
of a two-sided print is upside down compared to
the front side.
Description of the Copy Job Settings
218
Chapter 10 - Carry Out Copy Jobs
Canon varioPRINT DP line
To Next Page