Setting Values Description
[Print delivery] [Advanced set-
tings] -> [Print
order]
• [Front/back]
Default value. The front page on the front, the back page
on the back.
• [Back/front]
Puts the front page on the back and the back page on the
front.
[Advanced set-
tings] -> [Rota-
tion]
• [0 degrees]
• [180 degrees]
Rotates the prints 180 degrees.
[Output] Settings - [Margin erase]
Setting Values Description
[Margin erase]
[Binding edge] Margins of a document sometimes contain notes
or punch holes, for example. The machine allows
you to hide these elements on the copy. With the +
and - buttons of the [Binding edge] setting you can
define how much margin of the original you want
to erase. You can enter a value up to 100 mm /
3.94".
[Output] Settings - [Exposure]
Setting Values Description
[Exposure] [Dark] You can adjust the settings for light areas and dark
areas on the print separately.
• When an area on the output must be darker,
then select a value of -1 to -3.
• When the area must be lighter, then select a val-
ue of 1 to 3.
[Light] • When the area must be darker, then select a val-
ue of -1 to -3.
• When an area on the output must be lighter,
then select a value of 1 to 3.
Description of the Copy Job Settings
Chapter 10 - Carry Out Copy Jobs
225
Canon varioPRINT DP line
To Next Page