32 Preparations
NOTES
• About the LCD screen: The screen is produced using extremely high-pre-
cision manufacturing techniques, with more than 99.99% of the pixels
operating to specification. Less than 0.01% of the pixels may occasion-
ally misfire or appear as black, red, blue or green dots. This has no
effect on the recorded image and does not constitute a malfunction.
LCD Backlight
When recording in bright places it may be difficult to use the LCD
screen. Turn on the LCD backlight to make it brighter.
With the camcorder on, hold pressed down for more than 2
seconds.
• Repeat this action to switch the LCD backlight between off (normal) and
on (bright).
• If [LCD Screen Dimmer] is set to [ On], pressing for
more than 2 seconds will turn off the screen dimmer and return the LCD
screen to its previous brightness setting.
NOTES
• The LCD backlight does not affect the brightness of the recordings.
• Using the bright setting will shorten the effective usage time of the bat-
tery pack.
• You can further adjust the brightness of the LCD screen with the
[LCD Brightness] setting, or dim it with the [LCD Screen Dim-
180°
90°
Subject can monitor the LCD screen
180°
DISP.
DISP.
To Next Page
Loading...
