Canon XA10 User Manual

Using a Memory Card
39
NOTES
• You cannot use relay recording from the built-in memory to memory card Y. When using a single
memory card, be sure to insert it into memory card slot X.
• There will be a momentary stop in the scene at the point where the camcorder switches from one
memory to another.
• Any of the following actions will deactivate the relay recording function:
- Turning off the camcorder.
- Opening the double memory card slot cover.
- Changing the position of the mode switch.
- Changing the camcorder’s operating mode.
- Changing the memory used for recording movies.
Double Slot Recording
Double slot recording allows you to record the same scene simultaneously to both memory cards. This
is a convenient way to make a backup copy of your recording while you record.
1 Insert memory cards into memory card slot X and memory card slot Y.
2 Open the [Rec Media for Movies] screen.
[FUNC.] [MENU] 8 [Rec Media for Movies]
3 Activate double slot recording.
[4] [Double Slot Rec] [A]
4Touch [a].
• will appear on the screen.
NOTES
• If a memory card becomes full during double slot recording, recording on both cards will stop.
• If an error occurs with one of the memory cards, recording will continue on the other card.
Operating modes:

Canon XA10 Specifications

General

Sensor	1/3" CMOS
Resolution	1920 x 1080
Filter Diameter	58 mm
Image Stabilization	Optical Image Stabilization
Viewfinder Resolution	260, 000 dots
Headphone Jack	Yes
HDMI Output	Yes
Effective Pixels	Approx. 2.07 Megapixels
Lens	10x optical zoom
Aperture	f/1.8-3.0
Minimum Focusing Distance	1m (tele)
Recording Media	SD/SDHC/SDXC
Recording Format	AVCHD
Frame Rates	60i, 30p, 24p
Audio Recording	Dolby Digital 2-channel
Audio	Dolby Digital 2ch
LCD Screen	3.5" LCD
Viewfinder	0.24"
Memory Card Slots	2
Connectors	USB, HDMI, AV
Microphone	Stereo