Canon XA10 - Color Bars;Audio Reference Signal

Color Bars/Audio Reference Signal
83
Color Bars/Audio Reference Signal
You can have the camcorder output and record color bars and a 1 kHz audio reference signal.
1 Open the [Color Bars & Test Tone] screen.
[FUNC.] [MENU] 8 [C o lo r Bar s & Tes t Tone ]
2 Touch the desired option* and then touch [a].
* When you select [ Color Bars & Tone], you can adjust the audio reference signal. Touch [f] and
continue with the procedure below.
Options (

Default value)
To adjust the audio reference signal
1 Back in the 8 menu, touch [Audio Reference Signal].
2 Touch [ -12 dB], [ -18 dB] or [ -20 dB] and then touch [a].
Operating modes:
[B Off]

Select this option if you do not intend to use the color bars or audio reference signal.
[ Color Bars] Displays a standard SMPTE color bar pattern.
[ Color Bars & Tone] In addition to the color bar pattern, an audio reference signal is output.