Canon XA10 User Manual

Built-In Microphone Directionality
78
Built-In Microphone Directionality
You can change the directionality of the built-in microphone to have more control over how sound is
recorded.
1 Open the [Built-in Mic Directionality] screen.
[FUNC.] [MENU] 7 [Built-in Mic Directionality]
2 Touch the desired option and then touch [a].
Options
(

Default value)
NOTES
• Except when using the audio mix function, an external microphone overrides the built-in
microphone. In the following cases, the built-in microphone’s directionality cannot be changed.
- When an external microphone is connected to the MIC terminal with 7 [Audio Mix] set to
[B Off].
- When the audio input switch is set to EXT.
Operating modes:
[ Monaural] Mono recording that emphasizes sound coming from the front of the camcorder.
[ Normal]

Standard stereo recording; a middle point between the [Wide] and [Monaural]
settings in reach.
[ Wide]Stereo recording of ambient sound over a more extensive area that adds to the sense of
presence of movies.
[ Zoom] Stereo recording with the sound linked to the zoom position. The larger the subject
appears on the screen, the louder and more focused the sound will be.

Canon XA10 Specifications

General

Sensor	1/3" CMOS
Resolution	1920 x 1080
Filter Diameter	58 mm
Image Stabilization	Optical Image Stabilization
Viewfinder Resolution	260, 000 dots
Headphone Jack	Yes
HDMI Output	Yes
Effective Pixels	Approx. 2.07 Megapixels
Lens	10x optical zoom
Aperture	f/1.8-3.0
Minimum Focusing Distance	1m (tele)
Recording Media	SD/SDHC/SDXC
Recording Format	AVCHD
Frame Rates	60i, 30p, 24p
Audio Recording	Dolby Digital 2-channel
Audio	Dolby Digital 2ch
LCD Screen	3.5" LCD
Viewfinder	0.24"
Memory Card Slots	2
Connectors	USB, HDMI, AV
Microphone	Stereo