Canon XA10 User Manual

Faders
88
Faders
The camcorder offers two professional looking transition effects to fade-in or fade-out scenes. You
have the option to activate the fader only one time or every time you start or stop recording.
1 Open the fader selection screen.
[FUNC.] [O Faders]
2 Touch the desired fader and then touch [a].
• You can preview the transition effect on the screen.
• The icon of the selected fader appears in green.
To fade in/out
Press g in record pause mode (M) to start recording with a fade in. Press g
while recording (
N) to fade out and pause the recording.
NOTES
• When you apply a fader, not only the picture but also the sound will fade in or out.
• Faders cannot be used in the following cases:
- While using the [Old Movies] cinema-look filter in mode.
- When recording scenes with decorations.
- When recording video snapshot scenes.
- While pre-recording is activated.
• You can select whether to fade to/from a black screen or a white screen with the 7
[Fader Setting] setting.
Operating modes:

Canon XA10 Specifications

General

Sensor	1/3" CMOS
Resolution	1920 x 1080
Filter Diameter	58 mm
Image Stabilization	Optical Image Stabilization
Viewfinder Resolution	260, 000 dots
Headphone Jack	Yes
HDMI Output	Yes
Effective Pixels	Approx. 2.07 Megapixels
Lens	10x optical zoom
Aperture	f/1.8-3.0
Minimum Focusing Distance	1m (tele)
Recording Media	SD/SDHC/SDXC
Recording Format	AVCHD
Frame Rates	60i, 30p, 24p
Audio Recording	Dolby Digital 2-channel
Audio	Dolby Digital 2ch
LCD Screen	3.5" LCD
Viewfinder	0.24"
Memory Card Slots	2
Connectors	USB, HDMI, AV
Microphone	Stereo