CanyCom BP416 - Power Transmission System Issues

Troubleshooting
– 40 –
Location
Power
trans-
mission
system
Problem Main causes Remedy
Clutch disengagement is
bad
Improper adjustment Adjust (See page 31)
The V-belt slips when the
clutch is let in
Improper adjustment Adjust (See page 31)
Abnormal noise is made
near the transmission
Damaged gear or worn
bearing
Please contact your
Canycom distributor
Gears cannot be shifted
Improper adjustment of
clutch
Damaged gear or worn
bearing
Adjust (See page 31)
Please contact your
Canycom distributor
Gears disengage
Gears not smoothly
shifting
Worn gear
Excessive loading
Firmly shift gears
Please contact your
Canycom distributor
Reduce loading
The side clutch is loose
Improper adjustment Adjust (See page 33)
Turning cannot be done
smoothly
Improper adjustment Adjust (See page 33)
Shift the gears completely
The brake is applied.
Adjust the brake (See page 32)
Engage the V-belt, or adjust
( please contact your
Canycom distributor )
Please contact your
Canycom distributor
Vehicle will not move even
when the clutch is engaged
Gears are not shifted
completely
The vehicle does not move even
when the clutch is engaged.
V-belt disengaged or
excessively loosened
Failure of transmission