CanyCom BP416 - Brake and Crawler Problems; Dump and Lift System Malfunctions

Troubleshooting
– 41 –
Brake
Crawler
Poor braking
Adjust nut loosened
Brake lining worn
Oil in brake drum
Water in brake drum
Overload
Adjust (See page 31)
Replace the lining
(Please contact your
Canycom distributor)
Replace the oil seal
(Please contact your
Canycom distributor)
Apply the brake several
times to eliminate water
in the brake drum
Reduce the oveload
Crawler does not turn
smoothly
Improper adjustment
Adjust (See page 34)
Location
Roller,
upper
roller,
and
idler
Lift and
dump
system
Problem Main causes Remedy
Replace the defective
part (Please contact your
Canycom distributor)
Replace the defective
part (Please contact your
Canycom distributor)
Add or replace (See page
27)
Inspect and repair
Adjust (See page 35)
The dump or lift
equipment does not
operate, or mal-functions.
Oil in the power package is
short or deteriorated.
Oil leakage from hydraulic
system
Belt tension not sufficient
Defective bearings
Defective bearings
Discontinuous noise
Abnormal heating
Idler
Sprocket
Roller