Instruction manual C843I
Please keep this instruction manual for future reference
12
BEFORE USING YOUR NEW INDUCTION HOB
- Read this guide, taking special note of the ‘Safety Warnings’ section.
- Remove any protective film that may still be on your Induction hob.
TECHNICAL SPECIFICATION
Model code C843I
Cooking zones 4 Zones
Supply voltage 220-240V~
Installed electric power 6400-7200W
Product size LxWxH (mm) 590x520x60
Building in dimensions AxB (mm) 564x494
Weight and dimensions are approximate. We continually strive to improve our
products therefore we may change specifications and designs without prior notice.
USING THE TOUCH CONTROLS
- The controls respond to touch, so you don’t need to apply any pressure.
- Use the ball of your finger, not its tip.
- You will hear a beep each time a touch is registered.
- Make sure the controls are always clean, dry, and that there is no object (e.g.
a utensil or a cloth) covering them. Even a thin film of water may make the
controls difficult to operate.
C843i_Induction hob Instruction manual.indd 12 31/05/2018 16:45
To Next Page
Loading...
