Instruction manual C843I
Please keep this instruction manual for future reference
24
- Check with an electrician whether the domestic wiring system is suitable without
alterations. Any alterations must only be made by a qualified electrician.
- If the cable is damaged or needs replacing the operation must be carried out by a
Caple service engineer.
- If the appliance is being connected directly to the mains an omnipolar
circuitbreaker must be installed with a minimum opening of 3mm between
contacts.
- The installer must ensure that the correct electrical connection has been made and
that it is compliant with safety regulations.
- The cable must not be bent or compressed.
- The cable must be checked regularly and replaced by authorised technicians only.
C843i_Induction hob Instruction manual.indd 24 31/05/2018 16:45
To Next Page
Loading...
