Instruction manual C858i 17
Please keep this instruction manual for future reference
BRIDGE FUNCTION
- This area can be used as a single zone or as two different zones, according to your cooking
requirements.
- The bridge function is made of two independent zones that can be controlled separately. When
working as a single zone the part that is not covered by cookware is automatically switched off.
IMPORTANT:
- Ensure the cookware is centred on a single cooking zone. If you are using oval, rectangular or
elongated pans ensure the pan is centred on the cooking zone covering both crosses. Make sure
the cookware covers more than 3/4 area of the heating zone. Putting a round pan in the middle
region is not recommended.
- Examples of good pan placement and bad pan placement:
To Next Page
Loading...
