EasyManua.ls Logo

Caple CM465SS - Page 15

Caple CM465SS
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
Please keep this instruction manual for future reference Instruction manual CM465 / CM465SS / CM465GM
IMPORTANT
Always completely extract the drip tray, to avoid it falling when removing the grounds container.
Empty the grounds container and clean thoroughly, making sure all residues deposited on the
bottom are removed.
Every time you pull the drip tray out, the waste coffee container must also be emptied, even if it is
not completely full. If this process is not carried out, the waste coffee container may overfill when
coffee is made and the machine may get blocked.
Never remove the water tank when the appliance is dispensing coffee. Otherwise, the appliance
will not be able to make the coffee. If the appliance malfunctions, do not contact Caple service
straight away, first look at the troubleshooting guide. If this does not help, contact Caple
customer service.
CHANGING THE QUANTITY OF COFFEE:
The appliance is factory preset to automatically deliver the following quantities of coffee:
ESPRESSO CUP;
SMALL CUP;
MEDIUM CUP;
LARGE CUP;
MUG.
TO CHANGE THESE QUANTITIES, PROCEED AS FOLLOWS:
1. Press the touch key ‘MENU‘ (2) and press the ‘Scroll’ touch keys (5 and 7) until the menu
option “PROGRAM COFFEE” appears. Confirm the menu option with the touch key ‘OK’ (9).
2. Select the cup size you want to change with the scrolling touch keys (5 and 7). When the
desired cup size is displayed, confirm it with the touch key ‘OK’ (9).
3. A bar appears on the display, which can be made bigger or smaller; this represents the cup
filling quantity. A different quantity can be selected using the scrolling touch keys (5 and 7) in
10 steps. A full bar indicates that the maximum cup filling quantity of 220ml is selected.
4. Select the desired cup filling quantity and confirm it with the touch key ‘OK’ (9) to programme
this setting. If you don’t press the touch key ‘OK’ (9), the appliance automatically returns
to the coffee mode after 120 seconds without saving. After programming the display
automatically jumps back to the menu option for setting the filling quantity. To go back to the
coffee mode immediately, press the touch key ‘MENU’ (2) twice or wait about 120 seconds
until the appliance automatically returns to the coffee mode.

Related product manuals