Instruction manual CSB606 CSB706 CSB906 CSB1006
Please keep this instruction manual for future reference
5
GUIDE TO WALL MOUNTING AND FIXINGS
IMPORTANT
If plastic wall plugs are supplied with your product:
Make sure that the screws and wall plugs being used are suitable for supporting
your unit. Consult a qualified tradesperson if you are unsure.
- When drilling into walls always check that there are no hidden wires or pipes etc.
- Plugs are only suitable for use in masonry walls.
- If you are in any doubt about the correct wall plugs for your wall, seek
professional advice.
- Failure of the product due to using incorrect fixings is the responsibility of
the installer.
NOTE
- Always use a larger screw and wall plug if you are not sure.
- Ensure you use the recommended drill bit to match the wall plug and hole size.
- Ensure you drill the hole horizontally, do not force the drill or enlarge the hole.
- Take extra care when drilling high walls, ceilings and ceramic tiles. Ensure wall
plugs are inserted beyond the thickness of the ceramic tiles to avoid the tiles
splitting or cracking.
- Ensure wall plugs are well fitted and are a tight fit in the drilled hole.
CSB Splashback Instruction Manual.indd 5 31/05/2016 16:13
To Next Page
Loading...
