Instruction manual FGC620 FGC720 FGC920 13
Please keep this instruction manual for future reference
CHIMNEY INSTALLATION
Place the upper chimney into the lower chimney.
Attach the lower chimney bracket to the lower chimney.
Mark and drill 2 holes to fix the lower chimney bracket with 2 wall plugs and 2 screws ST4x30mm.
Slide the chimney to adjust the chimney height. When the height you require is reached, mark and
drill the fixing hole and fix the upper chimney bracket with 2 wall plugs and 2 screws ST4x30mm.
Fix the upper chimney with the upper chimney bracket using 2 scews ST4x8mm.
Instruction manual FGC
Please keep this instruction manual for future reference
13
7
7
Slide the chimney to adjust the chimney height. When the height you require is
Place the upper chimney into lower chimney.
�reached, mark and drill the fixing hole and fix the upper chimney bracket with 2
Fix the upper chimney with the upper chimney bracket using 2 scews ST4x8mm.
wall plugs and 2 ST4x30mm.
Attach the lower chimney bracket to the lower chimeny.
Mark and drill 2 holes to fix the lower chimney bracket with 2 wall plugs and 2
screws ST4x30mm
Chimney installation.
Instruction manual FGC
Please keep this instruction manual for future reference
13
7
7
Slide the chimney to adjust the chimney height. When the height you require is
Place the upper chimney into lower chimney.
�reached, mark and drill the fixing hole and fix the upper chimney bracket with 2
Fix the upper chimney with the upper chimney bracket using 2 scews ST4x8mm.
wall plugs and 2 ST4x30mm.
Attach the lower chimney bracket to the lower chimeny.
Mark and drill 2 holes to fix the lower chimney bracket with 2 wall plugs and 2
screws ST4x30mm
Chimney installation.
Upper Chimney
Lower Chimney
Wall Plug
Plate ||
Screw (4mm x 8mm)
Screw (4mm x 30mm)
To Next Page
Loading...
