Instruction manual TSCH601 & TSCH90114
Please keep this instruction manual for future reference
screws plugs
43 screws
Put the wall bracket onto the wall the 4mm edge panel fixes to the wall
and the 3mm edge panel supports the hood body. eep a distance of
1mm between bottom of the bracket and bottom of cabinet.
450 / 750
INSTALLATION TYPE THREE - Using the bracket
› Put the wall bracket onto the wall, the 40mm edge panel fixes to the wall and the 30mm edge
panel supports the hood body. Keep a distance of 199mm between bottom of the bracket and
bottom of the cabinet.
› After the wall bracket is fixed, fit the hood base to the wall bracket with 4*8mm screws. Based
on the cabinets width, it allows 22mm adjustment back and forth.
› Fix the hood into the bottom of the cabinet with the 4*30mm screws.
7
screw
holes
v
iew from A
4 screws
43 screws
o
p view
After the wall bracket is fixed fix the hood base to the wall bracket with 4mm
screws. ased on cabinets width it allows 22mm adustment back and forth.
Fix the hood into bottom of the cabinet with the 43mm screws
7
screw
holes
vie
w from A
4 screws
43 screws
op view
After the wall bracket is fixed fix the hood base to the wall bracket with 4mm
screws. ased on cabinets width it allows 22mm adustment back and forth.
Fix the hood into bottom of the cabinet with the 43mm screws
450 / 750
To Next Page
Loading...
