14 CaptionCall
Step 10: Touch the SSID drop-down list.
Touching the SSID drop-down list will display a list of all nearby wireless
routers discovered by the phone. e SSIDs are listed in descending order
of signal strength (i.e., higher in the list means a stronger signal).
Step 11: Select the name (the “SSID”) of your wireless router.
Step 12: Look at the Network Type and Encryption drop-down lists.
e phone will automatically set the correct options in the Network Type
and Encryption drop-down lists after it communicates with your router.
Normally, you should not have to change either of these settings.
Step 13: Touch the Network Key field and enter the correct key.
After you have entered the correct network key, the phone should be able
to connect to your router and obtain its network address using DHCP.
Step 14: Touch the Save button to save your wireless settings.
You will then be back at the Wireless Network Settings screen. e text on
the SSID button will have turned green to indicate the connection.
Making a connection may take 30 to 60 seconds, so be patient.
If you continue to have problems, you can try using the Network
Diagnostics button on the Network Settings screen.
If Your SSID Is Hidden
CaptionCall does not support “hidden” SSIDs
(i.e., routers that do not broadcast their
names). You must broadcast the SSID to allow
CaptionCall to connect to your router.
Setting Up the Wireless Feature
To Next Page
Loading...
