Version 15.03.2023 CAM(V100)/ (EF2L145/V20)+(100)/(V20) CI-RL4-NG4-HU
Contents
1. Prior to installation
1.1. Delivery contents
1.2. Checking the interface compatibility of vehicle and accessories
1.3. Connectors - video interface
1.4. Dip-switch settings
1.4.1. Settings of 8 dip – black
1.4.1.1. Activating the front camera input (dip 1)
1.4.1.2. Enabling the interface’s video inputs (dip 2-3)
1.4.1.3. Rear-view camera setting (dip 5)
1.4.1.4. Type of front camera
1.4.1.5. Monitor selection (dip7-8)
1.4.2. Settings of 4 dip - red
2. Installation
2.1. Place of installation
2.2. Connection scheme
2.3. Connection – LVDS switchable
2.4. Connection – 10pin power/CAN cable
2.5. Analogue power supply
2.6. Power supply output
2.7. Connection – video sources
2.7.1. Audio insertion
2.7.2. After-market frontcamera
2.7.3. After-market rear-view camera
2.7.3.1. Case 1: Interface receives the reverse gear signal
2.7.3.2. Case 2: Interface does not receive the reverse gear signal
2.8. Connection – external keypad
3. Interface operation by external keypad
3.1. By factory-infotainment-buttons in Citroen C5 and Peugeot 508 vehicles
3.2. By external keypad
4. Picture settings
5. Specifications
6. Frequently asked questions
To Next Page
Loading...