Car-Interface.com CI-RL4-NG4-HU - Checking the Interface Compatibility of Vehicle and Accessories

Version 15.03.2023 CAM(V100)/ (EF2L145/V20)+(100)/(V20) CI-RL4-NG4-HU
Page4
Requirements
Brand
Model
Navigation
Citroen
Berlingo (B9) 04/2008-03/2015,
C3 11/2009-ca.2015,
C3 Picasso 02/2009-07/2017,
C4 (N) 08/2010-12/2014,
C4 Picasso 09/2006-03/2013,
C5 model years 2008-2017,
C6 09/2005-12/2012,
C8 model years 2008-2014,
DS3 03/2010 – model year 2015,
DS4 05/2011 – model year 2014,
DS5 11/2011-03/2015,
Jumpy II 2009-2015
NaviDrive RT3evo/4/5,
MyWay RNEG,
NaviDrive 3D NG4,
eMyWay
Maserati
GranCabrio 2010-2017,
GranTurismo 2007-2017,
Quattroporte 2009-2012
N3 Magneti Marelli
Peugeot
1007 12/2006-12/2009,
207 02/2011-05/2012,
307 01/2007-03/2008,
307CC 01/2007-03/2009,
308 09/2007-2014,
308CC 04/2009-2015,
3008 06/2009-10/2016,
407 10/2006-12/2011,
508 10/2010-07/2014,
5008 10/2009-01/2017,
607 08/2006-09/2010,
Expert II 07/2007-2016,
Partner II 11/2007-05/2015,
RCZ 02/2010-12/2015
WIP Com/Connect Com
RT3evo/4/5/6,
RNEG,
WIP Com/Connect Com 3D
NG4,
WIP Nav+/Connect Nav+
Limitations
Video only The interface inserts ONLY video signals into the infotainment.
For inserting Audio signals either the possibly existing factory audio-
AUX-input or a FM-modulator can be used.
In case that 2 AV sources shall be connected, a desired audio switching
will require additional electronic.
Factory rear-view camera Automatically switching-back from inserted video to factory rear-view
camera is only possible while the reverse gear is engaged. To delay the
switch-back an additional electronic part is required.
After market front camera The front camera will automatically be switched for 10 seconds after
disengaging the reverse gear. A manually front camera switching is
possible by external keypad.
Video input signal NTSC video sources compatible only.
1.2. Checking the compatibility of vehicle and accessories