12. Do not touch the motor / engine when it is running or for some
time after it has been turned off , otherwise you are likely to GET
BURNT.
13. For perfect shredding , always check the outcoming product.
14. Check regularly that all the screws , nuts and bolts are tightened
properly.
15. DO NOT alter the rpm of the motor . If it needs to be adjusted ,
have it checked by an authorized dealer .
16. Keep the chipper free from leaves , oil or other materials to
prevent the risk of fire . Clean any oil off the motor using a
water jetter .
17. This chipper has been built to comply with all the latest safety
standards . To keep it in safe running order , always use original
parts and spares .
18. Only perform the routine maintenance work specified herein .
Contact a Caravaggi dealer for major repairs or other
maintenance .
19. Before starting up , make sure there are no foreign bodies in the
shredding chamber to prevent start up and rotation .
20. For chippers with built - in motors , always check the motor runs
properly and follow the Manufacturer’s recommendations .
21. Warm up the machine briefly and then run it at top speed .
22. Insert the material in the hopper slowly ( do not force it ) . Do
not attempt to insert material with dimension larger of 25 cm .
IMPORTANT
23. In the case of breakdown or sudden accident , first reduce
the number of rpm and then stop the motor if is necessary .
To Next Page
Loading...
