8555-M512-O1 Rev D 01/15 3
INTRODUCTION
Thank you for purchasing our MedVue
®
Model MV1 Medical Weight Analyzer. It has been
manufactured with quality and reliability at our factory in Webb City, MO USA. The MV1 has
been tested before leaving our factory to insure accuracy and dependability for years to come.
This manual is provided to guide you through installation, operation and maintenance of the
MedVue Model MV1 Medical Weight Analyzer. Please read it thoroughly before attempting to
install or operate the MV1 and keep it handy for future reference.
COPYRIGHT
All rights reserved. Reproduction or use, without expressed written permission, of editorial or
pictorial content, in any manner, is prohibited. No patent liability is assumed with respect to
the use of the information contained herein.
DISCLAIMER
While every precaution has been taken in the preparation of this manual, the Seller assumes
no responsibility for errors or omissions. Neither is any liability assumed for damages resulting
from use of the information contained herein. All instructions and diagrams have been
checked for accuracy and ease of application; however, success and safety in working with
tools depend to a great extent upon the individual accuracy, skill and caution. For this reason
the Seller is not able to guarantee the result of any procedure contained herein. Nor can they
assume responsibility for any damage to property or injury to persons occasioned from the
procedures. Persons engaging the procedures do so entirely at their own risk.
Serial Number ______________________
Date of Purchase ___________________
Purchased From ____________________
___________________________________
___________________________________
___________________________________
RETAIN THIS INFORMATION FOR FUTURE USE
PRECAUTIONS
Before using the weight analyzer, read this manual and pay special attention
to all "NOTIFICATION" symbols:
IMPORTANT
ELECTRICAL
WARNING
STATIC
SENSITVE
I
To Next Page
Loading...
Need help?
General