Need help?Do you have a question about the Cardinal MED VUE Mv1 and is the answer not in the manual?
General| Lighting | LED |
|---|---|
| Power Source | Battery |
| Color | White |
| Product Type | Makeup Mirror |
| Material | Plastic |
| Model | MED VUE Mv1 |
Lists key standard features like Metric Conversion, Auto Shut-Off, StableSENSE.
Requirements for AC power supply and proper grounding.
Overview of USB, Serial, Ethernet, WiFi specifications and data transmission.
Step-by-step guide for installing and replacing batteries.
How to reset the display to zero.
How to change weighing units (e.g., lbs to kg).
How to perform pushbutton or keypad tare operations.
Function for entering identification and height for BMI calculation.
Function for data entry completion and transmission.
Step-by-step guide to weighing a patient.
Procedure for tare when weight is unknown.
Procedure for entering a known tare weight.
How to store a tare weight into memory.
Steps for weighing with patient ID entry.
Tare operation with ID entry.
Procedure for entering known tare weight with ID.
How to calculate BMI using height rod or manual entry.
Calculating BMI with patient ID and height.
Calculating BMI using the digital height rod.
Calculating BMI with patient ID and digital height rod.
Steps to enter the protected calibration setup mode.
Lists parameters available for configuration in setup.
Setting the maximum weight capacity of the scale.
Setting the weighing units (e.g., lb, kg).
Setting the zero tracking range limit.
Configuring automatic zeroing on power up.
Initiating the calibration process.
Selecting single or multi-point calibration.
Entering the calibration weight value.
Entering the first calibration weight.
Entering the second calibration weight.
Steps after removing the calibration weights.
Enabling/disabling the gravity constant feature.
Setting the calibrated gravity constant.
Setting the operating gravity constant.
Setting the hold functionality (disabled, key-locked, auto-lock).
Setting the band for auto-lock reset.
Enabling/disabling BMI calculation.
Command to trigger printing or data transmission.
Meanings of various error codes displayed by the MV1.
Troubleshooting steps for power issues.
Troubleshooting for incorrect or missing weight readings.
Troubleshooting for height not displaying.
Required settings for connecting to Welch Allyn CVSM.
To Next Page