8555-M512-O1 Rev D 01/15 41
24 HOUR TIME (Use 24 Hour Time Format)
The display will show 24 HOUR TIME and the current setting. If the value displayed is
acceptable, press the PRINT/ENTER key to save it. Otherwise use the numeric keys 0/NO
or 1/YES and enter a new setting. Press the PRINT/ENTER key to save it.
Allowable values are YES or no.
YES = Use 24 Hour Time Format
(3PM displays 15:00)
no = Use 12 Hour Time Format
(3PM displays 3:00)
Calibration Setup is Complete
The Calibration Setup process has been completed. The MV1 will reset and then display
weight. Remove power from the MV1, re-install the end cap and secure with the two (2)
screws removed earlier. The MV1 is now ready for normal operation.
To Next Page
Loading...
Need help?
General