Bluetooth intercom pairing needs to be initiated on the other device.
4. To add a 4th rider, Rider 1 or Rider 2 connects to the additional rider on his free channel.
Bluetooth intercom pairing needs to be initiated on the additional device.
To pair a non-Cardo Bluetooth intercom group unit:
1. Confirm your unit is in Standby Bluetooth intercom mode (LED flashes blue slowly).
If your unit is not in Bluetooth intercom mode, tap and . For more information see, Switching
between Intercom modes on page 20.
2. To initiate 2-way pairing:
● On your unit, press for 5 seconds.
The LED flashes red.
● Tap to activate the Cardo gateway.
The LED flashes red and blue.
Phone pairing needs to be initiated on the other device.
● The unit confirms that pairing has succeeded.
3. To add a 3rd rider:
● Press for 5 seconds.
The LED flashes red.
● Tap 2 times. The LEDflashes blue.
17
To Next Page
Loading...
Need help?
General
