6.9 T = Parametri regolatore
to: indicatore / reset allarme HACCP
Questo parametro se posto a 1 indica l’attivazione di un errore HACCP.
Programmandolo a 0 viene resettato l’allarme.
Nei terminali di tipo LARGE, la stessa funzione si ottiene premendo
per 5 s il tasto HACCP.
-Def : 0
‘tu, ‘th, ‘t’: giorno, ora, minuto in cui è avvenuto l’evento HA
Questi parametri, di sola lettura, indicano quando è avvenuto l’allarme
HA.
- Def : -
|tu, |th, |t’: giorno, ora, minuto in cui è avvenuto l’evento HF
Questi parametri, di sola lettura, indicano quando è avvenuto l’allarme
HF.
- Def : -
tr: ritardo allarme HACCP
Tempo (in minuti) che, sommato al ritardo Ad, determina l’intervallo di
tempo, trascorso il quale, viene visualizzato l’errore HA.
Se impostato a 0, il monitoraggio HACCP è disabilitato.
- Def : 0
6.9 T = Controller parameters
to: indicator / reset HACCP alarm
If set to 1, this parameter indicates the activation of an HACCP. Setting
it to 0 resets the alarm.
In the LARGE terminals, the same function is achieved by pressing the
HACCP button for 5 s.
-Def : 0
‘tu, ‘th, ‘t’: day, hours, minutes at which the HA event occurred
These read-only parameters indicate when the HA alarm occurred.
- Def : -
|tu, |th, |t’: day, hours, minutes at which the HF event occurred
These read-only parameters indicate when the HF alarm occurred.
- Def : -
tr: HACCP alarm delay
Time (in minutes) which, added to the delay Ad, determines the delay
in the signalling of the HA error.
If set to 0, HACCP monitoring is disabled.
- Def : 0
34
MasterCella Split - cod. +030221396 rel. 1.2 - 03.12.2004
t PARAMETRI REGOLATORE Tipo Min Max U.M. Def.
to indicatore / reset allarme HACCP C 0 1 - 0
‘tu giorno settimana in cui è avvenuto l’evento HA C 1 7 - 0
‘th ora in cui è avvenuto l’evento HA C 0 23 ore 0
‘t’ minuto in cui è avvenuto l’evento HA C 0 59 min. 0
|tu giorno settimana in cui è avvenuto l’evento HF C 1 7 - 0
|th ora in cui è avvenuto l’evento HF C 0 23 ore 0
|t’ minuto in cui è avvenuto l’evento HF C 0 59 min. 0
tr ritardo allarme HACCP C 0 199 min. 0
¯t1 giorno evento defrost n.1 C 0 10 - 0
-t1 ora evento defrost n. 1 C 0 23 ora 0
_t1 minuto evento defrost n.1 C 0 59 min. 0
……. … …………
¯t4 giorno evento defrost n. 4 C 0 10 - 0
-t4 ora evento defrost n. 4 C 0 23 ora 0
_t4 minuto evento defrost n. 4 C 0 59 min. 0
tM minuto corrente orologio C 0 59 min. -
th ora corrente orologio C 0 23 ora -
td giorno della settimana corrente C 1 7 - -
Tab. 6.9.1
t CONTROLLER PARAMETERS Type Min Max UOM Def.
to HACCP alarm indicator / reset C 0 1 - 0
‘tu weekday on which the HA event occurred C 1 7 - 0
‘th hours at which the HA event occurred C 0 23 hours 0
‘t’ minutes at which the HA event occurred C 0 59 mins 0
|tu weekday on which the HF event occurred C 1 7 - 0
|th hours at which the HF event occurred C 0 23 hours 0
|t’ minutes at which the HF event occurred C 0 59 mins 0
tr HACCP alarm delay C 0 199 mins 0
-t1 day of defrost event no.1 C 0 10 - 0
-t1 hours of defrost event no. 1 C 0 23 hours 0
_t1 minutes of defrost event no.1 C 0 59 mins 0
……. … …………
-t4 day of defrost event no.4 C 0 10 - 0
-t4 hours of defrost event no. 4 C 0 23 hours 0
_t4 minutes of defrost event no.4 C 0 59 mins 0
tM current minutes C 0 59 mins -
th current hours C 0 23 hours -
td current day of the week C 1 7 - -
Table 6.9.1