PadScan HD 2
Caresono Technology Co., Ltd 8
2.5 Conditions to avoid
This device should avoid the following:
（1）Spraying water
（2）High humidity
（3）Poor draught
（4）Strong sunlight
（5）Dust environment
（6）Gas with salt or sulfur
（7）Chemical medicine or gas
（8）Strong vibration and crash
（9）Our company takes no responsibility for the risk of disassembling, refitting without our
permission.
（10）Do not immerse the probe in water or any other liquids.
（11）Keep probe away from heat sources.
（12）Only use the ultrasound gel which FDA listed or cleard. The use of gel is recommend. We
recommend an ultrasonic gel, which is manufactured by echo-med pharmaceuticals, Inc. echo gel
200(K#955246). Other substances may damage the probe and the probe cable.
（13）Keep the probe clean. Use neutral detergent or clean water to clean the ultrasound gel on
the probe.
2.6 Cautions when handling the device
（1）Turn off the power.
（2）Must not drop, vibrate and hit the device.
2.7 In case of device failure
If it is suspected that the device is not working properly, turn off the power and remove the battery.
Contact qualified technician for support.
To Next Page
Loading...