PadScan HD 2
Caresono Technology Co., Ltd 21
2. After finishing recording, playing and storing, long press the recording key for recording, then the
generated BMP, TEX and WAV files will overwrite the previous files.
6.3 Parameter setup
Long press setup key to enter parameter setup interface (as figure 5-3), including 6 menus. The
functions are as follows.
6.3.1 Mode selection setup
Enter the parameter setup interface. Expert mode is the default selection, press recording key to
select the modes. The two modes are expert mode and easy mode.
6.3.2 Sound volume setup
Enter the parameter setup interface. Press setup key to select the Sound volume setup item. Then
press recording key to set the sound volume level, it divides into Max, Medium and Min levels.
6.3.3 Remind setup
Enter the parameter setup interface. Press setup key to select the Remind setup item. Then press
recording key to set remind value. When the patient’s bladder volume value is higher than the set remind
value, the buzzer will alarm. The remind value divides into 4 levels including: OFF, 300,400 and 500.
Note:
1. OFF means that the alarm’s function is closed.
2. The level 300 means the patient’s bladder volume value is higher than 300ml, the buzzer will
alarm, otherwise it won’t alarm.
3. The level 400 means the patient’s bladder volume value is higher than 400ml, the buzzer will
alarm, otherwise it won’t alarm.
4. The level 500 means the patient’s bladder volume value is higher than 500ml, the buzzer will
To Next Page
Loading...