PadScan HD 2
Caresono Technology Co., Ltd 16
4.3 Power supply
The power supply: battery.
4.3.1 Battery power supply
（1）Install the battery into the main unit as described in “4.2”.
（2）Press the power button to turn on the device and enter the working state.
4.3.2 Battery power charging
Battery is charged by charger.
（1）Remove the battery from the main unit and connect it to the socket of the charger.
（2）Insert the AC plug of the charger into the power supply socket.
（3）When the battery is being charged, the indicator light on the charger turns red. When the
battery is fully charged, the indicator light turns green.
To Next Page
Loading...