Carestream Focus 35C - Detector Battery Lock and Activation

Installation
3–8 AJ4309 | 2019-08-13
Detector Battery Lock and Activation
To ensure the safety of the battery during transportation or storage, the battery can be
set to ship mode where it is locked and will not provide any voltage output.
Enter Ship Mode
Exit Ship Mode
Method Steps
Factory configuration
Web write in
1. Connect the adapter to the detector and
power it on.
2. Connect the other end of the adapter to
the PC.
3. Insert the battery into the detector.
4. Open a web browser and enter the
following address:
http://10.0.1.150/cgi-bin/ship-
mode.cgi?action=on
The battery is placed in ship mode.
Method Steps
Web exit
1. Connect the adapter to the detector and
power it on.
2. Connect the other end of the adapter to
the PC.
3. Insert the battery into the detector.
4. Open a web browser and enter the
following address:
http://10.0.1.150/cgi-bin/ship-
mode.cgi?action=off
The detector exits ship mode.