Operation
4–2 AJ4309 | 2019-08-13
Cleaning, Disinfection, and Sterilization of Patient Contact Surfaces
To prevent the risk of infection, wipe the patient contact surfaces after every
examination with a nonflammable disinfectant, such as benzalkonium chloride or
benzalkonium bromide. For details on how to sterilize, consult a specialist.
CAUTION:
Do not spray disinfectants or detergents directly onto the detector.
To prevent damage to the surface of the detector, wipe with a cloth slightly dampened with a
neutral detergent. Do not use solvents such as benzene and acid.
It is recommended to use a waterproof non-woven cover as the isolated layer between
the detector and a patient who is bleeding.
Applied Part
The front and back of the detector is an application part.
To Next Page
Loading...