Carimali DIVA COF - Machine Parameters; Language Selection; Serial Communication Settings; Waiting Time Configuration

LB.05099.02 Pag. 27 18/10/16
MACHINE PARAMETERS
PLEASE NOTE: some of the following parameters may not be displayed depending to the machine configuration
previously programmed.
Language
Serial
Disable
I/O Hartwall
1200
I/O 9600
For I/O 18 - 26 Relais
or PC cable 1200 Baud rate
For PC cable 9600 Baud rate
In dose program menu will be activated
the relevant parameters
Recive time-out
0,500 m.sec
0.020 msec. / 5 000 msec
Waiting time
Coffee dose A-B
Xx min.
Additional coffee water
Xx ml.
2ml.
10min.
Variable Value : + / -
0-60min.
1-50ml.
With these two parameters it is possible to set an
additional water amount for the first coffee
dispensed after a settable time out (default
values are respectively 10minutes and 2ml).
Time out starts after a coffee dispensing, a group
rinsing or cleaning cycle.
System manager
- System clock programming
- Service
- Alarm history
- Display regulation
- Change password
- Test actuactors
- Boiler draining
- Machine configuration
- Preset configuration data
Machine parameters
Nederlands
Polski
Japanese
Italiano
Deutsch
Danish
Norwegian
Espanol
English