Test actuators
- Actuators 1
- Actuators 2
- Actuators 3
- Actuators 4
- Milk pump
Actuators 1
PRESS A DOSE KEYS BETWEEN B1
TO B7 TO ACTIVATE THE ACTUATOR
THAT YOU WISH TO CHECK.
PRESS THE SAME DOSE KEY TO
STOP THE ACTIVATED ACTUATOR
FROM WORKING.
THE THREE DIGITS N°. ( Imp.yyy)
NEXT TO GROUP SOLENOID VALVE
INDICATES THE FLOW METER
COUNTING.
System manager
- System clock programming
- Service
- Alarm history
- Display regulation
- Machine parameters
- Change password
- Boiler draining
- Machine configuration
- Preset configuration data
Test actuators
Test actuators
- Actuators 2
- Actuators 3
- Actuators 4
- Milk pump
Actuators 1
Test actuators
B1¹ Water pump
B2¹ Fil.-up water S.V.
B4¹ Group 1 S.V. xx Imp.yyy
B6¹ Mix Gr 1 S.V. xx °C
B7¹ Group 1 heater xx °C
Actuators 2
Test actuators
- Actuators 1
- Actuators 3
- Actuators 4
- Milk pump
Actuators 2
Test actuators
B1¹ Boiler heater xx °C
B2¹ Cup warmer xx °C
B1² Group 2 S.V. xx Imp.yyy
B2² Mix Gr 2 S.V. xx °C
B4² Group 2 heater xx °C
Press a dose keys
between B1 to B7 to
activate the actuator
that you wish to chek.
Press the same dose
key to stop it working.
XX: indicate the value
To Next Page
Loading...
