LB-00193-20.EN Pag. 9 10-02-09
DOSE PROGRAMMING
Programming the volumetric coffee dose.
Press key N°5 ( contin./ progr.) and keep it pressed for five seconds. The programming level is shown by the flashing LED on
the keys N°5 ( contin./ progr.).
press the coffee dose key to be programmed and the beverage will start being dispensed;
The display shows:
press the selected dose key again when the required dose has been delivered. The dose will be stored in memory
automatically.
The planning effected on the left group will be brought on all the machine keypads.
In the case is required to diversify the doses from the remainders keypad, repeat the procedure on the right keypad.
Please Note: To exit the programming phase without modifying the parameters, it is necessary to wait the time
out of five seconds without pressing any key.
SETTING PARAMETERS MACHINE MODEL PRATICA DOUBLE STEAM
To enter in the setting parameters menu of the machine, it’s necessary to remove the left side panel, open the
master cover and connect an external display (code 96.00718.Ca)
Hereunder the procedure to enter in the setting parameters
- Turn off the machine by the use of the main switch
- Turn on the machine keeping pressed the button N° 5 (continuous/programme) till the display shows the
programming menu. See next page
To scroll and confirm the voices of the menu the buttons to use are the following :
To Next Page
Loading...
