EN
www.carlisleft.com 77-3345 R1.1 (06/2022)
26 / 62
Be sure to store all removed parts in a safe place.
5. Disassembly instructions:
The needles can now be pushed to the bottom of the cylinder (1) and pulled out from the central body (2).
To separate the central body extension from the central body axis start with unscrewing the three (3)
screws holding the two pieces of the lock ring together. This will allow you to remove one piece of the lock
ring (4) but also the central body extension (5).
1
2
3
4
5
To Next Page
Loading...
