P
Paul SnyderAug 20, 2025
What to do if CARPI C 34 DS motor starts but does not reach standard rpm?
- LlsalazarAug 21, 2025
If your CARPI Trimmer's motor starts but doesn't reach the standard RPM, consider these potential causes: * The air filter may be dirty or wet. Try cleaning the filter. * The spark plug could be dirty. Remove it and use a brush to clean off any excess carbon. Replace if necessary. * There might be condensation in the fuel tank. Clean the tank with petrol and refill it with new 2-stroke fuel that does not contain condensation. * The silencer could be blocked. Clean the exhaust pipe.