Controls
Warning! Disconnect the power supply
before opening the control unit cover.
The unit can be used in conjunction with
the infrared remote control or the “Room
Controller” or “Zone Manager” cable type
remote control (optional accessories).
Instructions for use of the cable-type and
infrared remote controls are included in the
respective manuals.
The control units must be opened and
installed by qualified personnel only.
IR remote control “Room Controller” “Zone Manager”
Selecting S.HI speed
The unit is configured for three speeds,
LO-ME-HI. To select S.HI speed, proceed
as follows:
• open the cover of the unit’s electrical
panel;
• move the brown cable from terminal V3 to
terminal V4;
• close the cover of the electrical panel.
GB-22
To Next Page
Loading...
