No. Item Outline of specifications Remarks
8
Louver control
(Continued):
<<Individual air direction setup>>
• Pushing
Louver select button enables every
discharge port to set up the air direction.
• In case of no input (key operation) for approx. 5 seconds
during setting of individual air direction (during displaying
of louver No. on the remote controller screen), the remote
controller screen returns to the normal display screen.
• For the air direction illustration during normal operation,
the air direction of the least No. among the louvers
which are block-set is displayed.
• While individual air direction is being set, the remote
controller operation (Illustration of air direction) and
operation of the real machine are linked.
• When selecting a case,
Louver select button
is not pushed or louver No. is not displayed, the air
directions of all the louvers are collectively set up.
Drain pipeRefrigerant pipe
Setup from the remote
controller without
button is
unavailable.
For the setup
operation, refer to
“How to set up louver
individually” of Item
“Setup at local site/
Others”.
To Next Page
Loading...
